FP420148S Fisher And Paykel Valve Inlet 24v Aftermarket
Fisher & Paykel 24Volt Non-Genuine Proportional Cold Single Water Inlet Solenoid Valve. Outlet suits 10mm hose. Inlet is 1/2″ BSP standard tap thread (actual thread diameter 1″). This non-genuine solenoid valve fits many late model Fisher & Paykel washing machines. The latest IW & GW series ending in 12 machines use a different dual inlet valve. Earlier valves had the connector pushed vertically up into the socket. The new replacement has the connector horizontal. It has a small 2pin connector rather than the 2 spade terminals used on older valves.
Alternate part numbers: FP420148S, 420148P, 426560, 420238P, FP420148P, FP426560, FP420238P. Can also be used in place of 420147P, FP420147P
Compatible Models: Used on Phase 5 GW509, GW609, GW709, GWC09, GWL09, GWM09 & MW059, LW059, AW095 machines. Also used on Intuitive & Ecosmart models, IW509, IW609, IW709, GWL10, IW710, IW810, IWC09, IWL10, IWM10 & Phase 6 series 11 & 12 models GW511, GW611, GW711, GW512, GW612, GW712, GWC11, GWM11, GWL11, GW712, GWC12, GWM12, GWL12, IW511, IW711, IW811, IW512, IW712 (some), IW812 (some), IWM11, IWL11, IWM12, IWL12 plus many more.
Contact us with your model information to confirm if this part is suitable for you.